Myklens

HomeBlogHow Do I Use Laundry Scent Booster Beads? Myklens Guide

Back to Blog

How Do I Use Laundry Scent Booster Beads? Myklens Guide

October 12, 2026 Myklens Team 5 min read
How Do I Use Laundry Scent Booster Beads? Myklens Guide

Many shoppers ask, "How do I use laundry scent booster beads?" The good news is it is incredibly easy. In this Myklens guide, we will walk you through the simple steps so you can get the best, longest-lasting fragrance from your wash.

Step-by-Step Guide for Top and Front Load Washers

The golden rule for scent beads is simple: always add them directly to the washer drum, never the detergent dispenser.

For Top Load Washers:

  1. Add the beads first: Place your desired amount of Myklens Laundry Scent Booster Beads directly into the empty drum.

  2. Add clothes: Put your laundry on top of the beads.

  3. Add detergent: Add your regular detergent to the dispenser or drum as you normally would.

  4. Start the washer: The water will dissolve the beads, infusing your fabrics with incredible scent.

For Front Load Washers:

  1. Add the beads: Toss the Myklens scent beads directly into the empty drum. Put them at the back so they rinse away easily.

  2. Add clothes: Load your clothes on top of the beads.

  3. Add detergent: Put your laundry detergent in the designated dispenser drawer.

  4. Run the cycle: Start your machine. The beads will dissolve perfectly in the wash water.

Dosage Guide: How Much Should You Use?

Finding the right amount of beads depends on how strong you want the fragrance. Always use the cap provided on the Myklens bottle.

  • Light Scent: Use a half capful of beads.

  • Medium Scent: Use a full capful.

  • Strong Scent: Use one and a half capfuls.

For extra-large loads or heavily soiled items, you may want to use a little more. Start small and adjust based on your personal preference!

Common Mistakes to Avoid

  • Putting beads in the dispenser: This is the biggest mistake! Beads need water to dissolve. If you put them in the detergent drawer, they can clump and clog the machine.

  • Adding beads after the clothes: If you put clothes in first, the beads can get trapped in the folds and might not dissolve evenly. Always put beads in the drum first.

  • Overusing the beads: More is not always better. Using too many beads can leave a residue on your clothes. Stick to the recommended dosage.

Quick FAQ

Do scent beads replace laundry detergent?
No. Scent boosters only add fragrance. You still need laundry detergent to clean away dirt and stains.

Do Myklens beads work in cold water?
Yes! Myklens Laundry Scent Booster Beads are designed to dissolve completely in hot, warm, and cold water washes.

Are scent beads safe for all fabrics?
They are great for everyday fabrics like cotton, polyester, and linens. However, it is best to skip the beads when washing microfiber, activewear, or flame-retardant children's sleepwear.

Upgrade Your Laundry Routine

Now that you know the answer to "How do I use laundry scent booster beads?", it is time to upgrade your laundry routine. Myklens Laundry Scent Booster Beads give your clothes a burst of long-lasting fragrance that makes every load a joy.

Ready to experience the fresh difference? [Shop Myklens Laundry Scent Booster Beads here!]

Industry NewsNew Products